wifi network of other communication & networking modules usb wifi access point module

• Type: WiFi Module
• Work Mode: AP+STA
• WiFi Antenna Type: Built-in
• Transmission Rate: <100Mbps
• Voltage: 3.3V
• Antenna Gain: dB
• Model NO.: 6188E-UF
• Color: Green
• Certification: ISO9001
• Dimension: L x W x H: 12.2 x 13 x1.5 mm
• Wi-Fi Interface: Support USB v2.0
• Chipset: RTL8188FTV
• Transport Package: Reel or Tray
• Specification: 802.11 b/g/n Single-band 1T1R 2.4GHz WiFi Module
• Trademark: Fn-Link
• Origin: China
• HS Code: 8517629900
• Production Capacity: 20000000

Product Description

Product Description

 

wifi network of other communication & networking modules usb wifi access point module

1. Introduction

Fn-Link Technology would like to announce a low-cost and low-power consumption module which has all of

the Wi-Fi functionalities. It is a highly-integrated IEEE 802.11 a/b/g/n MAC/Baseband/RF WLAN single chip.

For Wireless LAN(WLAN)operation. The integrated module provides USB interface for Wi-Fi .

The module provides simple legacy and 20MHz co-existence mechanisms to ensure backward and network compatibility.

6188E-UF uses highly integrated Wi-Fi single chip based on advanced COMS process.
6188E-UF integrates whole Wi-Fi function blocks into a chip, such as USB/PCM, MAC, BB, AFE, RFE, PA, EEPROM and

LDO/SWR, except fewer passive components remained on PCB.
 

This compact module is a total solution for Wi-Fi technology.
The module is specifically developed for Smart phones and Portable devices.

2. Features
 

General

Enterprise level security which can apply WPA/WPA2 certification for Wi-Fi.
 

PHY Features

Operate at ISM frequency bands (2.4GHz)

IEEE standards support: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11d, IEEE 802.11e, IEEE 802.11h, IEEE 802.11i.

Wi-Fi 1 transmitter and 1 receiver allow data rates supporting up to 72.2 Mbps downstream and 72.2 Mbps upstream PHY rates
 

Host Interface

USB for Wi-Fi

3. General Specification
 

Model Name	6188E-UF
Product Description	Support Wi-Fi functionalities
Dimension	L x W x H: 12.2 x 13 x1.5 (typical) mm
Wi-Fi Interface	Support USB2.0
OS supported	Android /Linux/ Win CE /iOS /XP/WIN7
Operating temperature	0°C to 70°C
Storage temperature	-40°C to 125°C

 

Detailed Photos

 

4. Block Diagram



5. Ordering Information
 

Part No.	Description
FG6188EUFX-00	RTL8188FTV-VQ1, b/g/n, Wi-Fi, 1T1R, 12.2X13mm, USB, with IPEX Connector, PCB V1.0
FG6188EUFX-01	RTL8188FTV-VQ1, b/g/n, Wi-Fi,1T1R, 12.2X13mm, USB, with stamp hole, PCB V1.0
FG6188EUFX-02	RTL8188FTV-VQ0, b/g/n, Wi-Fi, 1T1R, 12.2X13mm, USB, weld external antenna from IPEX Connector, PCB V1.0
FG6188EUFX-03	RTL8188FTV-VQ1, b/g/n, Wi-Fi, 1T1R, 12.2X13mm, USB, with stamp hole, PCB V1.0, with shielding
FG6188EUFX-04	RTL8188FTV-VC, b/g/n, Wi-Fi,1T1R, 12.2X13mm, USB ,With IPEX Connector, PCB Version V1.0
FG6188EUFX-05	RTL8188FTV-VC, b/g/n, Wi-Fi,1T1R, 12.2X13mm, USB , with stamp hole, PCB Version V1.0, Without IPEX Connector
FG6188EUFX-06	RTL8188FTV-VC,b/g/n,Wi-Fi,1T1R,12.2X13mm,USB,With shielding, with stamp hole,  PCB Version V1.0
FG6188EUFX-07	RTL8188FTV-VQ1-CG,b/g/n,Wi-Fi,1T1R,12.2X13mm,USB , with stamp hole, (-VQ1 chip only supports HT20)

 

Company Profile

FN-LINK TECHNOLOGY LIMITED

Founded in 2015, Fn-Link Technology Limited is a national-level high-tech enterprise and a national-level specialized new small giant enterprise. Focusing on the field of wireless network communication, mainly engaged in the R&D, production and sales of wireless communication modules, system solutions, peripheral equipment and audio-visual equipment. Including IEEE802.11 a/b/g/n/ac/ax, BT, Cat.1bis, NB-IoT, PLC, UWB, millimeter Wave, Sub1G, Zigbee and AIoT modules, etc.

 

Our company is headquartered in the national Liuyang Economic and Technological Development Zone, with a land area of more than 200 acres, a total construction area of about 100,000 square meters, and a registered capital of 83.31 million yuan. It has Changsha R&D Center, Shenzhen Branch and Hangzhou wholly-owned subsidiary.

 

Our company's core R&D personnel have more than 10 years of senior radio frequency experience in wireless communication, and their excellent independent R&D capabilities have injected strong momentum into the company's scientific and technological innovation.

Certifications

 

Our company strictly implements ISO9001:2015 quality management standards, and the products have passed domestic SRRC, Harmony and global FCC, CE and other regulatory certifications and EU RoHS, REACH environmental protection directives.

Our Advantages

Our company has a full-process automated production and testing system, 9 FUJI NXT-III high-precision placement lines, 15 automatic testing of wireless network products, 5 assembly production lines. The production and testing capacity is 400KPCS/day, the annual output of intelligent IoT modules is 120 million, and more than 400 million modules have been delivered to customers at home and abroad. The products are distributed in more than 50 countries and regions around the world.

 

Our company's domestic customers include Huawei, Haier, Xiaomi, Midea, Hisense, Gree, Hikvision, Skyworth, Ecovacs, Dingding and other industry-leading companies, and overseas customers include Flir,  Cecotec, Fibar, Somfy, etc. The market share has steadily increased in the fields of consumer digital, commercial equipment, home appliances, electrical lighting, personal medical care and smart cities at home and abroad.

Our company will adhere to the dual driving factors of scenario-based services and independent research and development, take professional IoT product technology and services as the driving force, take customer experience as the core, and continue to innovate and provide global customers with competitive advantages in high-performance, highly integrated module products, overall solutions and powerful localized technical services. Let "everyone have broadband" evolve and upgrade to a new era of "intelligent connection of all things"!