BL602C-20-Q2I IoT Module J102L-R Wi-Fi Single-band 1x1 802.11b/g/n + BLE 5.0 Combo Module

• Type: WiFi Module
• Work Mode: AP+STA
• WiFi Antenna Type: external antenna / on board antenna
• Transmission Rate: <100Mbps
• Voltage: 3.3V
• Antenna Gain: 0dB
• Model NO.: J102L-R
• Color: Black
• Certification: ISO9001, RoHS
• WiFi: 802.11 b/g/n
• Dimension: L x W x H: 25.0mm*31.0mm*3.50mm
• RF Chains: 1T1R
• Wi-Fi Interface: Support SDIO/UART
• BT Interface: UART
• Chipset: BL602C-20-Q2I
• Transport Package: Tray or Reel
• Specification: Wi-Fi Single-band 1x1 802.11b/g/n + BLE 5.0 Combo
• Trademark: Fn-Link
• Origin: China
• HS Code: 8517629900
• Production Capacity: 100000000

Product Description

1. Introduction
 

Fn-Link J102L-R is a wireless module based on WiFi + BLE single chip SOC BL602C, which can meet

the requirements of low power consumption and high performance IOT.
The core processor BL602C integrates the baseband and MAC design of 2.4G WiFi (802.11b/g/n) and BLE 5.0.
The micro-controller subsystem consists of a low-power 32-bit RISC CPU, cache and memory.

With advanced power management unit, Fn-Link J102L-R support a variety of low power consumption modes.
The program can be downloaded and burned directly through UART.

 

 

2. Features
 

General

802.11b/g/n compatible WLAN

Wi-Fi Security WPS / WEP / WPA / WPA2 Personal / WPA2 Enterprise / WPA3

Wi-Fi fast connection with BLE assistance
 

PHY Features

72.2Mbps transmit and receive PHY rate using 20MHz bandwidth

Support STA and SoftAP, STA+SoftAP and sniffer modes
 

MCU Features

32-bit RISC CPU with FPU

RAM 276KB

ROM 128KB

Flash 2MB

Build-In 32KHz RTC
 

Host Interface

Support UART Interface

Support PWM Interface
 

Bluetooth Features

Wi-Fi and BLE coexistence

Bluetooth® Low Energy 5.0

BLE 5.0 Channel Selection#2 is supported

3. Block Diagram




4. Ordering Information
 

Part No.	Description
FGJ102LRX-00	BL602C-20-Q2I /802.11b/g/n/ WiFi + BLE 5.0, 1T1R , UART, antenna on board, 25mm*31mm,finished product.